Icom F80DS 31 I.S. version UHF handheld
380-450MHz P25; no keypad; FIPS & AES; BP-254 battery; FASC04U antenna no charger
The Smart Migration to an APCO P25 Digital Radio System
Intrinsically safe versions can only be upgraded to P25 digital at a I.S. certified facility. Enhanced MDC versions can be upgraded with purchase of optional UT-120 board and P25 activation key, but the enhanced MDC features will be lost.
*These versions are special order only - please allow 90 to 120 days ARO for delivery.
**Enhanced MDC adds GPS capabilities for AVL/APL and allows use of free-form short text messages of up to 48 characters in length.
***Any of these digital versions may be upgraded with AES and/or DES encryption (non-FIPS certified). Optional activation key option must be purchased.
****FIPS 140-2 versions come with activated, factory installed AES (FIPS certified) and DES (non-FIPS certified). No activation code is require
IP57 dust-tight and waterproof protection
The F70/F80 series has dust-tight and waterproof protection equivalent to IP57 and is tested to demanding MIL-STD 810 requirements. IP57 waterproof protection means the F70/F80 series can be submerged in 1 meter of water for 30 minutes. The F70/F80 series can withstand rugged use even under harsh weather conditions.
Built-in multiple signaling
Use the built-in CTCSS, DTCS, 2-Tone, 5-Tone and BIIS capability to set up your own talk groups and quiet stand-by when others are talking. You can also set up selective calls to individuals or control a repeater.
Multiple 2-Tone, Multiple 5-Tone
Up to 10 2-Tone and 8 5-Tone codes can be decoded on a single memory channel. This is perfect for professionals who require multiple district paging on one channel. When a matched tone is received, the following items are programmable for each code.
- Bell icon
- Answer back
- Beep sound
- Auto transmit
The large high contrast LCD clearly shows a variety of information with a full dot-matrix display. Program the display to show either 1 line with 12 characters or 2 lines with 24 characters. Status icons are displayed at the top and the functions assigned to the P buttons (P0P3) are shown at the bottom of the display.The bottom of the LCD shows the assigned functions (see right)
Li-Ion battery pack
The large capacity 1600mAh Lithium-Ion (Li-Ion) battery pack, BP-235 provides a practical 8 hours* of operating time. Li-Ion batteries allow flexible charging and have almost no memory effect.* Typical operation Tx:Rx: Stand-by=5:5:90
Tactical group function
The tactical group function allows you to copy memory channels to the tactical zone (zone 32) and dynamically regroup memory channels. Using the optional zone copy cable, memory channels in the tactical zone can be transferred from a master radio to other radios.
Built-in voice scrambler
The IC-F70/F80 series includes a built-in inversion type voice scrambler. When a more secure system is required, the optional voice scrambler unit UT-109 or UT-110 is available.* These voice scrambler functions are not available in digital mode.
MDC 1200 compatible
The following selective calling and ANI features are available with the built-in MDC signaling.
- PTT ID/Caller ID
- Radio check
- Selective call
- Call alert
- Emergency, emergency mic monitoring
- Emergency man down (with UT-124)
- Radio stun/revive
- 500 Aliases
- Call log
Remote Management and Diagnostics
EMDC radios can be configured to allow their radio signal strength indicator (RSSI) and battery level gauge to be remotely monitored by the dispatcher. The dispatcher can also adjust the configuration of GPS periodic reporting from the field units remotely.
The only requirements to add a full suite of signaling capabilities are:
- Icom radios with EMDC
- At least one Icom base station radio with EMDC for the dispatch station
- A Windows® PC with Icom or authorized 3rd party EMDC software installed at the dispatch console
Intrinsically safe version
Intrinsically safe version approved by FM Approvals, is suitable for use in hazardous areas where flammable gasses or liquids are used.
Radio stun/kill and Power-on password function
The radio stun/kill functions disable a lost or stolen radio over the air, eliminating security threats from undesired listeners. The power-on password prevents unauthorized people turning on the radio.
The FIPS 140-2 validation confirms that the Icom encryption module, Icom AES Encryption, has passed rigorous field tests and provides agencies the independent assurance that the module meets or exceeds the highest performance standards in encryption for its classification. FIPS encryption is a requirement for many federal agencies.
Intrinsically Safe (I.S.) refers to electronics equipment in which electrical energy is not present at levels that would spark and ignite an oxidized mixture of flammable gasses, vapors or liquids or combustible dusts or fibers.
Icom I.S. two-way radios are approved by Factory Mutual (FM), an international third-party insurance and loss prevention company.
- 256 memory channels with 32 zones
- Built-in audio compander
- 8 DTMF autodial memories
- Normal and priority scans
- Busy, repeater lockout functions
- Wide and narrow (25/12.5kHz) channel spacing is programmable
- Power ON password, and more...